Page Comparison

Updated: Updated: 23rd June 2021

JIRA: Epics Status below:

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - Done
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - Done
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress will be continued in E release
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - Done
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress will be continued in E release (Irrespective of FDD or TDD stack)
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified. Call flow updated at
    https://wiki.o-ran-sc.org/display/RSAC/Closed+Loop+Automation+Call+Flow+-+O-DU+High+APIs.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction is completed
  - Code changes for Config update over F1 interface is completed
  - O1 Integration for O-DU for CLA is completed ( Cell stop and Cell restart)
  - Blocker : code segmentation is observed, analysis is going on (code optimization is required to be scoped in E release)
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
  - Further debug sessions needed to close the ongoing issues.
  - There is no breakthrough even after several debug sessions with O-DU Low
  - SIB1 detection at L1 is successful. PHY.XML is updated with removing the hardware accelerator (<dpdkBasebandFecMode> from 1 to 0 to force the SW encoder)
  - For the CLA usecase, Cell stop request is received from O-DU high to low but O-DU low sends stop indication multiple times. This issue is fixed in L1 later binary 20.08. This binary update will happen in D-maintenance phase.
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM configured as per H/W and S/W requirements of Radisys CU
  - The Network interfaces and CentOS version needs to be revisited for the CU machine.
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Viavi confirmed receiving at O-RU. Needs verification from UE sim.
  - Debug session is planned on 23rd June to achieve SSB and SIB1 transmission till UE simulator and then follow with RACH procedure.
  - Latest issue: the eCPRI packets differentiation between control plane and user plane through vlan id is supported by Intel, howver O-RU support the packet differentiation based on eCPRI packet type. hence the fronthaul transmission validation is blocked.

Updates from HCL:

https://jira.o-ran-sc.org/browse/ODUHIGH-247 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
https://jira.o-ran-sc.org/browse/ODUHIGH-297 - Done

As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM

https://jira.o-ran-sc.org/browse/ODUHIGH-322 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-327 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-328 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-347 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Tested locally with SMO both with IPv4 and IPv6. Able to mount and connect ODU.
  - Integration with SMO in working fine with IPv4 but with IPv6 could not tested as it is not enabled in OSC lab
  - Integration with O-DU code for cell down and up scenario is completed, validation is completed
  - Edit-config testing from SMO to ODU for cell down/up is in completed in OSC lab

Dependency/Blockers:

O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
Viavi to confirm successful decoding of SSB/SIB1 at UE sim (TM500).

Updated: 23rd June 2021

JIRA: Epics Status below:

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - Done
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - Done
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress will be continued in E release
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - Done
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress will be continued in E release (Irrespective of FDD or TDD stack)
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified. Call flow updated at
    https://wiki.o-ran-sc.org/display/RSAC/Closed+Loop+Automation+Call+Flow+-+O-DU+High+APIs.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction is completed
  - Code changes for Config update over F1 interface is completed
  - O1 Integration for O-DU for CLA is completed ( Cell stop and Cell restart)
  - Blocker : code segmentation is observed, analysis is going on (code optimization is required to be scoped in E release)
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
  - Further debug sessions needed to close the ongoing issues.
  - There is no breakthrough even after several debug sessions with O-DU Low
  - SIB1 detection at L1 is successful. PHY.XML is updated with removing the hardware accelerator (<dpdkBasebandFecMode> from 1 to 0 to force the SW encoder)
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM configured as per H/W and S/W requirements of Radisys CU
  - The Network interfaces and CentOS version needs to be revisited for the CU machine.
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Viavi confirmed receiving at O-RU. Needs verification from UE sim.
  - Debug session is planned on 23rd June to achieve SSB and SIB1 transmission till UE simulator and then follow with RACH procedure.

...

https://jira.o-ran-sc.org/browse/ODUHIGH-247 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
https://jira.o-ran-sc.org/browse/ODUHIGH-297 - Done

As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM

https://jira.o-ran-sc.org/browse/ODUHIGH-322 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-327 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-328 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-347 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Testing Tested locally with SMO is in done.Looking into IPv6 related configuration issueboth with IPv4 and IPv6. Able to mount and connect ODU.
  - Integration with SMO in working fine with IPv4 but with IPv6 could not tested as it is not enabled in OSC lab
  - Integration with O-DU code for cell down and up scenario is completed, validation is completed
  - Edit-config testing from SMO to ODU for cell down/up is in progress in OSC lab

Dependency/Blockers:

O1 configuration for day-1 shall need to be completed to start with CLA. However basic configuration e.g. cell state/operational state/admin state shall be supported initially. Use admin state as unlocked to validate the RU link failure.
Server(VM) configuration (H/W and S/W) to mount Radisys CU as a test fixture.
Unable to use valgrind with Intel libraries. Debugging must be carried out with Alternate methods.
Viavi to confirm successful decoding of SSB/SIB1 at UE sim (TM500).

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified. Call flow updated at
    https://wiki.o-ran-sc.org/display/RSAC/Closed+Loop+Automation+Call+Flow+-+O-DU+High+APIs.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction is completed
  - Code changes for Config update over F1 interface is completed
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
  - Further debug sessions needed to close the ongoing issues.
  - There is no breakthrough even after several debug sessions with O-DU Low
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM configured as per H/W and S/W requirements of Radisys CU
  - The Network interfaces and CentOS version needs to be revisited for the CU machine.
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Viavi confirmed receiving at O-RU. Needs verification from UE sim.

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified. Call flow updated at
    https://wiki.o-ran-sc.org/display/RSAC/Closed+Loop+Automation+Call+Flow+-+O-DU+High+APIs.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction under review
  - Code changes for Config update over F1 interface is completed
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
  - Further debug sessions needed to close the ongoing issues.
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM configured as per H/W and S/W requirements of Radisys CU
  - The Network interfaces and CentOS version needs to be revisited for the CU machine.
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Viavi confirmed receiving at O-RU. Needs verification from UE sim.

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified. Call flow updated at
    https://wiki.o-ran-sc.org/display/RSAC/Closed+Loop+Automation+Call+Flow+-+O-DU+High+APIs.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - Awaiting inputs from Intel
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM to be configured as per H/W and S/W requirements of Radisys CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Viavi confirmed receiving at O-RU. Needs verification from UE sim.

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
  - Code changes for UE registration flow in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
  - Code changes for UE registration flow in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
  - Code changes for UE registration flow in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - Awaiting inputs from Intel
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM to be configured as per H/W and S/W requirements of Radisys CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Awaiting input from Viavi

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-247 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
https://jira.o-ran-sc.org/browse/ODUHIGH-297 - Done

As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM

https://jira.o-ran-sc.org/browse/ODUHIGH-322 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - Awaiting inputs from Intel
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM to be configured as per H/W and S/Wrequirements of Radisys CU
https://jira.o-ran-sc.org/browse/ODUHIGH-327 - In review
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Awaiting input from Viavi
https://jira.o-ran-sc.org/browse/ODUHIGH-328 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-247 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
https://jira.o-ran-sc.org/browse/ODUHIGH-297 - Done

As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM

https://jira.o-ran-sc.org/browse/ODUHIGH-322 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Tracking RACH allocation in review
  - Msg 2 to Msg 4 allocation in review
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Tracking RACH allocation in review
  - Msg 2 to Msg 4 allocation in review
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Tracking RACH allocation in review
  - Msg 2 to Msg 4 allocation in review
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-327 - In review
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
https://jira.o-ran-sc.org/browse/ODUHIGH-328 - TODO
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - RACH allocation in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - RACH allocation in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - RACH allocation in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality complete
  - Cell delete functionality under review
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission w,r.t error observed at O-DU Low
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality under review
  - Cell delete functionality under review
  - Code changes for CU Interaction in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission w,r.t symbol allocation/overlapping
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarifed.
  - UE delete functionality under review
  - Cell delete functionality under review
  - Code changes for CU Interaction in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation design for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation design for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
  - UE delete functionality under review
  - Cell delete functionality coding in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation design for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
  - UE delete functionality under review
  - Cell delete functionality coding in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
  - Coding changes in progress for UE delete from DU APP to RLC
  - UE delete functionality from DU APP to MAC under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB testing blocked. Awaiting debug session with Intel
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

O1 configuration for day-1 shall need to be completed to start with CLA.
SSB integration testing with O-DU Low in Radio mode. Awaiting debug session with Intel.

Updated: 17th March 2021

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Resource allocation at SCH in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Resource allocation at SCH in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation at SCH in progress for time domain.
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
  - Coding changes in progress for UE delete from DU APP to RLC
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - Received slot indications
  - Fixed config issues
  - SSB testing in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
  - Code changes have been completed for AM and UM modes
  - Testing in progress with a debugging issue of number of packets not being received at DU app.
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
  - Code changes have been completed for AM and UM mode
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Resource allocation at SCH in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Resource allocation at SCH in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation at SCH in progress for time domain.
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - Received slot indications
  - SSB testing in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

Version	Old Version 75	New Version 76
Changes made by	Vidhu	Former user
Saved on	Jun 24, 2021	Jun 30, 2021

Versions Compared

Key