Page Comparison

Updated: 16th June 2021

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified. Call flow updated at
    https://wiki.o-ran-sc.org/display/RSAC/Closed+Loop+Automation+Call+Flow+-+O-DU+High+APIs.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction is completed
  - Code changes for Config update over F1 interface is completed
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
  - Further debug sessions needed to close the ongoing issues.
  - There is no breakthrough even after several debug sessions with O-DU Low
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM configured as per H/W and S/W requirements of Radisys CU
  - The Network interfaces and CentOS version needs to be revisited for the CU machine.
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Viavi confirmed receiving at O-RU. Needs verification from UE sim.

...

https://jira.o-ran-sc.org/browse/ODUHIGH-247 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
https://jira.o-ran-sc.org/browse/ODUHIGH-297 - Done

As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM

https://jira.o-ran-sc.org/browse/ODUHIGH-322 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-327 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-328 - WIPDone
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-caseEdit-config implementation for o-ran-sc-du-hello-world YANG (admin state changes), Done
Jira Legacy
server System Jira
serverId 3122c0e4-6090-3a7d-9725-8b5a32a8eaeb
key ODUHIGH-347
- WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Testing locally with SMO is in progress
  - Looking into IPv6 related configuration issue
  - Integration with O-DU code for cell down and up scenario is completed, validation in progress
  - SMO upgradation is done
  - Integration testing with OAM in progress

Dependency/Blockers:

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified. Call flow updated at
    https://wiki.o-ran-sc.org/display/RSAC/Closed+Loop+Automation+Call+Flow+-+O-DU+High+APIs.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction under review
  - Code changes for Config update over F1 interface is completed
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - PDSCH for SIB1 is detected at L1 but L1 does not process it. Pointer is to check the PDSCH PDU parameters
  - Further debug sessions needed to close the ongoing issues.
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM configured as per H/W and S/W requirements of Radisys CU
  - The Network interfaces and CentOS version needs to be revisited for the CU machine.
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Viavi confirmed receiving at O-RU. Needs verification from UE sim.

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB to msg5 completed
  - Code changes for UE registration flow in progress
  - Updates to k0, k1, k2 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified. Call flow updated at
    https://wiki.o-ran-sc.org/display/RSAC/Closed+Loop+Automation+Call+Flow+-+O-DU+High+APIs.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - Awaiting inputs from Intel
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM to be configured as per H/W and S/W requirements of Radisys CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Viavi confirmed receiving at O-RU. Needs verification from UE sim.

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
  - Code changes for UE registration flow in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
  - Code changes for UE registration flow in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
  - Code changes for UE registration flow in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Issue with mis-coordination between cell delete and DL RRC message, resolved.
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - Awaiting inputs from Intel
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM to be configured as per H/W and S/W requirements of Radisys CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Awaiting input from Viavi

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-247 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
https://jira.o-ran-sc.org/browse/ODUHIGH-297 - Done

As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM

https://jira.o-ran-sc.org/browse/ODUHIGH-322 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Msg1 to msg4 changes completed.
  - Resource table optimization in process
  - Reviewing other layers for relevant changes
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
  - Awaiting inputs from Intel
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - New VM to be configured as per H/W and S/Wrequirements of Radisys CU
https://jira.o-ran-sc.org/browse/ODUHIGH-327 - In review
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
  - Awaiting input from Viavi
https://jira.o-ran-sc.org/browse/ODUHIGH-328 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-247 - Done
- As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM
https://jira.o-ran-sc.org/browse/ODUHIGH-297 - Done

As an O-DU L2 developer, I want to Establish Netconf session for O1 interface for CM

https://jira.o-ran-sc.org/browse/ODUHIGH-322 - Done
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Tracking RACH allocation in review
  - Msg 2 to Msg 4 allocation in review
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Tracking RACH allocation in review
  - Msg 2 to Msg 4 allocation in review
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - Tracking RACH allocation in review
  - Msg 2 to Msg 4 allocation in review
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality complete
  - Cell delete functionality complete
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission , PDCCH is received but no PDSCH seen at O-DU low.
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-327 - In review
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - WIP
- As an O-DU L2 developer, I want to support End to End testing scenarios
  - Testing of broadcast messages at O-RU emulator set to begin
https://jira.o-ran-sc.org/browse/ODUHIGH-328 - TODO
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - RACH allocation in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - RACH allocation in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation for SSB and SIB1 completed.
  - RACH allocation in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality complete
  - Cell delete functionality under review
  - Code changes for CU Interaction under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission w,r.t error observed at O-DU Low
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarified.
  - UE delete functionality under review
  - Cell delete functionality under review
  - Code changes for CU Interaction in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission w,r.t symbol allocation/overlapping
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation for SIB1 under review
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress. Basic configuration is agreed to support CLA use case.
  - Internal call flow/message sequence between O-CU and O-DU for cell activation and deactivation is clarifed.
  - UE delete functionality under review
  - Cell delete functionality under review
  - Code changes for CU Interaction in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation design for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation design for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
  - UE delete functionality under review
  - Cell delete functionality coding in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Resource allocation design for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes and testing completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
  - UE delete functionality under review
  - Cell delete functionality coding in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB transmission successful
  - Debugging issue with Sib1 transmission
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
  - Using Radisys commercial CU as a test fixture
  - Awaiting server allocation
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing in progress for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Brainstorming for SIB1 in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
  - Coding changes in progress for UE delete from DU APP to RLC
  - UE delete functionality from DU APP to MAC under review
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - SSB testing blocked. Awaiting debug session with Intel
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

O1 configuration for day-1 shall need to be completed to start with CLA.
SSB integration testing with O-DU Low in Radio mode. Awaiting debug session with Intel.

Updated: 17th March 2021

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Resource allocation at SCH in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Resource allocation at SCH in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation at SCH in progress for time domain.
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
  - Coding changes in progress for UE delete from DU APP to RLC
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - Received slot indications
  - Fixed config issues
  - SSB testing in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

https://jira.o-ran-sc.org/browse/ODUHIGH-184 - Done
- As an O-DU L2 developer, I want to implement single UE DL data path and bench-marking
  - Code changes have been completed for AM and UM modes
  - Testing in progress with a debugging issue of number of packets not being received at DU app.
https://jira.o-ran-sc.org/browse/ODUHIGH-185 - Done
- As an O-DU L2 developer, I want to implement single UE UL data path and bench-marking
  - Code changes have been completed for AM and UM mode
https://jira.o-ran-sc.org/browse/ODUHIGH-186 - WIP
- As an O-DU L2 developer, I want to add support for 64QAM modulation scheme in DL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-187 - WIP
- As an O-DU L2 developer, I want to add support for 16QAM modulation scheme in UL
  - Basic code changes complete. Testing to be done for data path
https://jira.o-ran-sc.org/browse/ODUHIGH-264 - WIP
- As an O-DU L2 developer, I want to add support for Mu1
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Resource allocation at SCH in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-265 - WIP
- As an O-DU L2 developer, I want to add support for 100 MHz Bandwidth
  - Code changes at DU APP completed.
  - Code changes completed for SSB.
  - Resource allocation at SCH in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-266 - WIP
- As an O-DU L2 developer, I want to add support for TDD mode
  - Code changes at DU APP completed.
  - Resource allocation at SCH in progress for time domain.
https://jira.o-ran-sc.org/browse/ODUHIGH-299 - WIP
- As an O-DU L2 developer, I want to develop O-DU High Layers to support Closed Loop Automation Use-case
  - Discussions on the O-DU PNF Registration and Activation process is ongoing
  - Yang modules to be supported by O-DU to ensure the end-to-end functionality of the use case "Closed loop" is in progress.
https://jira.o-ran-sc.org/browse/ODUHIGH-267 - WIP
- As an O-DU L2 developer, I want to integrate O-DU High with O-DU Low in Radio Mode
  - Received slot indications
  - SSB testing in progress
https://jira.o-ran-sc.org/browse/ODUHIGH-268 - TODO
- As an O-DU L2 developer, I want to integrate O-DU High with O-CU
https://jira.o-ran-sc.org/browse/ODUHIGH-269 - TODO
- As an O-DU L2 developer, I want to support End to End testing scenarios

...

Version	Old Version 70	New Version 71
Changes made by	Former user	Vidhu
Saved on	Jun 16, 2021	Jun 16, 2021

Versions Compared

Key