Page Comparison

...

1. Preparation

   • Setup StarlingX.Install INF(StarlingX R8.0) AIO-SX by following the procedure.

     • https://docs.starlingx.io/r/stx.8.0/deploy_install_guides/release/virtual/aio_simplex.html

   • Prepare a Linux environment in which the network is reachable to the INF AIO-SX with Bash CLI. And, install the required packages.

     $ sudo apt-get install git make patch jq
     # Make sure your CLI has the 'kubectl' and 'helm' installed

   • Clone openstack-helm and openstack-helm-infra code on your Linux.

     $ git clone --depth 1 --branch 82a6aa8ce96b1669af0b9e8da85b537d02fc5fd3 https://opendev.org/openstack/openstack-helm.git
     $ git clone --depth 1 --branch 5e5a52cc04a5da32f4b355fe4eeb2b6998f6de5e https://opendev.org/openstack/openstack-helm-infra.git
     

   • Copy the "/etc/kubernetes/admin.conf" on the INF controller node to your local Linux.

     $ scp <INF-controller-0>:/etc/kubernetes/admin.conf ~/.kube/config
     # Change the IP address in the ~/.kube/config
     #     server: https://<INF-OAM-IP>:6443
     # You can get the OAM IP through this command on controller node
     # system addrpool-show `system addrpool-list | grep oam | awk '{print $2}'` | grep floating_address

   • Add labels to controller-0 node.

     $ kubectl label node controller-0 ceph-mgr=enabled
     $ kubectl label node controller-0 ceph-mon=enabled
     $ kubectl label node controller-0 ceph-mds=enabled
     $ kubectl label node controller-0 ceph-rgw=enabled
     $ kubectl label node controller-0 ceph-osd=enabled
     $ kubectl label node controller-0 openstack-control-plane=enabled

   • Create namespaces.

     $ kubectl create namespace openstack
     $ kubectl create namespace ceph

...