CreatePolicy

policy

-  type: Policy

-  direction: inout

policyError

-  type: PolicyError

-  direction: out

responseCode

-  type: Integer

-  direction: return

-  Note: Return code on the CreatePolicy operation with the following values:
201- Created
204 - No content
4xx - An error case.

Create a policy for a single UE or for multiple UEs.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

QueryPolicy

policyId

-  type: String

-  direction: in

policy

-  type: Policy

-  direction: out

policyList

-  type: PolicyList

-  direction: out

returnCode

-  type: Integer

-  direction: return

-  Note: Return code with the following values
200 - Ok
4xx - Error

pollicyError

-  type: PolicyError

-  direction: out

The operation to read a policy ofr a single UE or a group of UEs.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UpdatePolicyComplete

policyId

-  type: String

-  direction: in

policy

-  type: Policy

-  direction: inout

policyError

-  type: PolicyError

-  direction: out

responseCode

-  type: Integer

-  direction: return

-  Note: Response codes area s follows:
- 201 - Created
- 204 - No conent
- 4xx  - Error

The operation to completely update a policy for a single UE or a group of UEs.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UpdatePolicyPartial

policyId

-  type: String

-  direction: in

policy

-  type: Policy

-  direction: inout

policyError

-  type: PolicyError

-  direction: in

responseCode

-  type: Integer

-  direction: in

-  Note: responseCode values include:
201 - Created
204 - No conent
4xx - error

The operation to partially update a policy for a single UE or a group of UEs.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

DeletePolicy

policyId

-  type: String

-  direction: in

-  Note: Policy to be deleted.

policyError

-  type: PolicyError

-  direction: in

responseCode

-  type: String

-  direction: in

-  Note: response codes are as follows:
204 - No Content
4xx - Error

The operation to delete a policy for a single UE or a group of UEs.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

NotifyPolicy (FeedbackPolicy)

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

QueryCapabilities

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

Reference

·         reference:  From 2019.08.14-oRAN.WG2-A1AP_v00.00.01

Reset

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

GnbCuUpE1Setup

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

GnbCuCpE1Setup

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

GnbCuCpConfigUpdate

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

GnbCuUpConfig Update

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

E1Release

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

GnbCuUpStatusIndication

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

RICSubscriptionManagement

Used to establish E2 subscriptions on the E2 node consisting of an event trigger and a sequence of actions.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

RIC Indication

Used to carry messages from a specific RAN Function to the RIC resulting from a REPORT or INSERT Action

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

NearRTRICServiceReport

Near-RT RIC requests that E2 NODE sends a REPORT message to Near-RT RIC and the associated procedure continues in E2 NODE after each occurrence of a defined SUBSCRIPTION
The REPORT service involves following steps:
1.            Near-RT RIC configures a SUBSCRIPTION in the E2 NODE with information used to configure an INDICATION (Report) that is to be performed by E2 NODE with each occurrence of trigger event
2.            During normal functioning of the E2 NODE, a trigger event is detected.
3.            E2 NODE sends INDICATION to Near-RT RIC containing requested REPORT information along with originating Request ID.
4.            Normal functionality continues on the E2 NODE.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

NearRTRICServiceInsert

Near-RT RIC requests that E2 NODE sends an INSERT message to Near-RT RIC and suspends the associated procedure in E2 NODE after each occurrence of a defined SUBSCRIPTION
The INSERT service involves following steps:
1.   Near-RT RIC configures a SUBSCRIPTION in the E2 NODE with information used to configure an INDICATION(Insert) along with a wait timer that is to be performed by E2 NODE with each occurrence of EVENT
2.            During normal functioning of the E2 NODE, a trigger event is detected.
3.            E2 Node sends INDICATION to Near-RT RIC containing requested INSERT information along with originating Request ID.
4.            E2 Node suspends or halts the associated procedure after a defined Wait period (wait may be set to zero).
This process may then be followed by either:
-              Near-RT RIC sends a CONTROL message to trigger a new associated procedure or resume suspended procedure using modified call state or information
-              Wait timer associated for suspended procedure expires, and original associated procedure continues or halted

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

NearRTRICServiceControl

Near-RT RIC sends a Control message to E2 Node to initiate or resume the suspended associated procedure in the E2 Node
The CONTROL service involves following steps:
1.            Near-RT RIC detects a trigger event. This step may be either triggered by a previous INDICATION sent by E2 Node or internal to Near-RT RIC
2.            Near-RT RIC performs action
3.            Near-RT RIC sends CONTROL request to E2 Node.  This step may contain an information used to identify a previous suspended call process and may request acknowledgement
4.            E2 NODE initiates or resumes a call process
5.            If requested, E2 Node sends a CONTROL Acknowledgement

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

NearRTRICServicePolicy

Near-RT RIC requests that E2 Node executes a specific POLICY during functioning of the E2 Node after each occurrence of a defined SUBSCRIPTION
The POLICY service involves following steps:
1.            Near-RT RIC configures a SUBSCRIPTION in the E2 NODE with information used to configure a POLICY that is to be performed by E2 NODE with each occurrence of trigger event
2.            During normal functioning of the E2 NODE, a trigger event is detected.
3.            E2 NODE modifies ongoing call process according to information contained in the POLICY description statement
4.            Normal functionality continues on the E2 NODE.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

NearRTRICServiceUpdate

a E2 NODE initiated procedure to inform Near-RT RIC of changes to list of supported Near-RT RIC services and mapping of services to functions.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

RANConfigurationUpdate

a E2 node-initiated procedure to inform Near-RT RIC of changes to RAN configuration information.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

InterfaceManagement

E2 set-up, E2 reset, Reporting of General Error Situations

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

Reset

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

ErrorIndication

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

Setup

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

DUConfUpdate

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

CUConfigUpdate

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

DUResourceCoordination

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

DUStatusIndication

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UEContextSetup

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UEContextReleaesRequest

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UEContextRelease

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UEContextModification

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UEContextModificationRequired

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UEInactiityNotification

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

Notify

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

InitialULRRCMessageTransfer

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

ULRRCMessageTransfer

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

DLRRCMessageTransfer

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

RRCDeliveryReport

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

WriteReplaceWarning

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

PWSCancel

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

PWSRestartIndication

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

PWSFailureIndication

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SystemInformationDelivery

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

Paging

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

F1uUserDataTransfer

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

F1uFlowControl

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

CreateManagedObjectInstance

Provisioning MnS Consumer sends synchronous provisioning updates to Provisioning MnS Provider to create a Managed Object Instance (MOI) on the Provisioning MnS Provider and set its attribute values.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

ModifyManagedObjectAttributes

Provisioning MnS Consumer sends synchronous provisioning updates to Provisioning MnS Provider to modify the attributes of a MOI on the Provisioning MnS Provider.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:

  false

·         support: MANDATORY

DeleteManagedObjectInstance

Provisioning MnS Consumer sends synchronous provisioning updates to Provisioning MnS Provider to delete a MOI and its children on the Provisioning MnS Provider.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

ReadManagedObjectInstanceAttributes

Provisioning MnS Consumer sends synchronous provisioning request to Provisioning MnS Provider to return the values of attributes of its MOI(s) on the Provisioning MnS Provider.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

NotifyManagedObjectInstanceAttributeValueChange

Provisioning MnS Provider sends an asynchronous notifyMOIAttributeValueChange Notification to the Provisioning MnS Consumer to report a configuration change on the Provisioning MnS Provider .

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

FaultNotification

Fault Supervision MnS Provider sends asynchronous Fault3gpp notification event to Fault Supervision MnS Consumer when an alarm occurs, is cleared, changes state or priority, etc.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

FaultSupervisionControl

Starting with 3GPP Release 16, dedicated operations for Management Services Use Cases will be replaced by IOCs with attributes that can be read and/or set using generic provisioning mechanisms.   For Fault Supervision, O-RAN requires the ability to Get Alarm List and Clear Alarm.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

PerformanceDataFileReporting

Performance Assurance MnS Provider sends asynchronous FileReady notification event to Performance Assurance MnS Consumer sent when PM File is ready for upload. The FileReady notification contains one parameter indicating the location at which the file can be retrieved.
Performance Assurance MnS Consumer uploads Bulk PM File from Performance Assurance MnS Provider via secure file transfer protocol, triggered by FileReady event.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

PeformanceDataStreaming

Performance Assurance MnS Provider steams high volume asynchronous Real Time Performance Measurement (RTPM) data to Performance Assurance MnS Consumer at a configurable frequency.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

PerformanceAssuraneControl

Starting with 3GPP Release 16, dedicated operations for Performance Assurance Control will be replaced by IOCs with attributes that can be read and/or set using generic provisioning mechanisms.   For Performance Assurance, this includes operations such as Create Measurement Job, Terminate Measurement Job and Query Measurement Job.   Measurement jobs can be created, terminated and queried by setting and/or getting attributes in the MeasurementControl and MeasurementReader IOCs.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

TraceDataReporting

High volume asynchronous streaming of Subscriber and Equipment Trace data (e.g. Call, Cell, UE, MDT) from Trace MnS Provider to Trace MnS Subscriber sent upon triggering event.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

TraceSessionActiviation

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

TraceSessionDeactiviation

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

TraceRecordingSessionActivation

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

TraceRecordingSessionDeactivation

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

FileReadyNotification

The File Ready Notification notifies a File Management MnS Consumer that a file is available for upload from the File Management MnS Provider.  In general, File Management MnS Provider sends a FileReady notification for files that the File Management MnS Consumer has configured the File Management MnS Provider to collect on a periodic basis, such as file-based Trace Data or PM Measurement Reports.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

ListAvailableFiles

File Management MnS Consumer queries the File Management MnS Provider to identify files that are available on the File Management MnS Provider.  Upon receipt of the available files and their locations, the File Management MnS Consumer can determine the next appropriate action.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UploadFile

The Upload File Service provides the capability for a File Management MnS Consumer to upload files from the location provided by the File Management MnS Provider.  The File Management MnS Consumer may perform this action as a result of a FileReady notification from the File Management MnS Provider informing the File Management MnS Consumer that a file is now available to upload, such as a Performance Management Report (see section 2.5.1) or the File Management MnS Consumer may perform this function after querying the File Management MnS Provider to provide the list of available files for upload (see section 2.5.2).  In any case, the file upload is performed using a secure file transfer protocol (SFTP or FTPeS) from the location provided by the File Management MnS Provider.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

DownloadFile

The File Management MnS Consumer has a file that needs to be downloaded to the File Management MnS Provider such as:
•             Software file to upgrade software version executed on the File Management MnS Provider
•             Beamforming configuration file (Opaque Vendor specific data)
•             Machine Learning
•             Certificates
The File Management MnS Consumer triggers the file download.  The File Management MnS Provider uses a secure file transfer protocol to download the file from the location specified by the File Management MnS Consumer and then notifies the File Management MnS Consumer of the result of the download.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

HeartbeatNotification

Communication Surveillance MnS Provider sends asynchronous heartbeat event to Communication Surveillance MnS Consumer at a configurable frequency to allow Communication Surveillance MnS Consumer to supervise the connectivity to the Communication Surveillance MnS Provider.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

CommunicationSurveillanceControl

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

PnfPlugNPlan

PNF Plug-n-Play (PnP) scenario enables a PNF ME to obtain the necessary start-up configuration to allow it to register with a PNF Startup and Registration MnS Consumer for subsequent management.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

PnfRegistration

PNF Startup and Registration MnS Provider sends an asynchronous pnfRegistration event to a PNF Startup and Registration MnS Consumer after PnP to notify PNF Startup and Registration MnS Consumer of new PNF Startup and Registration MnS Provider to be managed

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SoftwarePackageNamingContent

PNF Software Package naming, content and format are vendor specific and do not require standardization in O-RAN.  A PNF Software Package may contain one or more files.  Some of the files in the Software Package may be optional for the PNF (example: a file that has not changed version).  The PNF is aware of the content and format of its available Software Packages and can determine which files it needs to download.
The softwarePackage Managed Object Class (MOC) contains attributes about a software package such as:  software package name, version, fileList, integrityStatus (valid, invalid, empty), runningState (active, passive), vendor, productName, softwareType (operational, factory), etc. This MOC is applicable to VNFs and PNFs and is a generic term that O-RAN will use to refer to the software available on the PNF rather than the legacy term of software slot.  On a PNF, a softwarePackage MOI corresponds to a hardware software slot.
The PNF creates one instance of softwarePackage for each software package supported concurrently on the PNF.  Typically, a PNF will have two softwarePackage MOIs for operational software; one with runningState = active and one with runningState = passive.  Some PNFs also have a softwarePackage MOI for the factory software which would be read only.  O-RAN may have PNFs that support more than one passive slot.  In this case the inventory query result would show multiple MOIs with runningState=passive.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SofwareInventory

The PNF Startup and Registration MnS Consumer sends a Software Inventory Request and retrieves information about the software packages on the PNF Software MnS Provider.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SoftwareDownload

Software Download triggers the download of a specific software package to the PNF Software MnS Provider.  This download service includes integrity checks on the downloaded software and the installation of the software into the software slot corresponding to the softwarePackage MOI.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SoftwarePreCheck

Software Pre-check is an optional Use Case that the Service Provider may choose to utilize to confirm that the PNF Software MnS Provider is in a good state to activate the new software and provide information needed for planning the timing of the software replacement--such as whether a reset or a data migration is required.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SoftwareActivate

PNF Software MnS Consumer triggers the activation of a software package on the PNF Software MnS Provider including data migration and reset if needed.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

HandoverPreparation

This procedure is used to establish necessary resources in an eNB for an incoming handover.
The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SNStatusTransfer

The purpose of the SN Status Transfer procedure is to transfer the uplink PDCP SN and HFN receiver status and the downlink PDCP SN and HFN transmitter status either, from the source to the target eNB during an X2 handover, between the eNBs involved in dual connectivity and/or LWA, or between MeNB and en-gNB involved in EN-DC, for each respective E-RAB for which PDCP SN and HFN status preservation applies.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

UEContextRelease

For handover, the UE Context Release procedure is initiated by the target eNB to indicate to the source eNB that radio and control plane resources for the associated UE context are allowed to be released.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

HandoverCancel

The Handover Cancel procedure is used to enable a source eNB to cancel an ongoing handover preparation or an already prepared handover.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

LoadIndication

The purpose of the Load Indication procedure is to transfer load and interference co-ordination information between eNBs controlling intra-frequency neighboring cells, and additionally between eNBs controlling inter-frequency neighboring cells for TDD.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

ErrorIndication

The Error Indication procedure is initiated by an eNB to report detected errors in one incoming message, provided they cannot be reported by an appropriate failure message.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

X2Setup

The purpose of the X2 Setup procedure is to exchange application level configuration data needed for two eNBs to interoperate correctly over the X2 interface. This procedure erases any existing application level configuration data in the two nodes and replaces it by the one received. This procedure also resets the X2 interface like a Reset procedure would do.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

Reset

The purpose of the Reset procedure is to align the resources in eNB1 and eNB2, or the resources in eNB and en-gNB involved in the EN-DC in the event of an abnormal failure. The procedure resets the X2 interface. This procedure doesn't affect the application level configuration data exchanged during, e.g., the X2 Setup procedure, EN-DC X2 Setup procedure.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

ENBConfigurationUpdate

The purpose of the eNB Configuration Update procedure is to update application level configuration data needed for two eNBs to interoperate correctly over the X2 interface.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

ResourceStatusReportingInitiation

This procedure is used by an eNB to request the reporting of load measurements to another eNB.
The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

ResourceStatusReporting

This procedure is initiated by eNB2 to report the result of measurements admitted by eNB2 following a successful Resource Status Reporting Initiation procedure.
The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

MobilitySettingsChange

This procedure enables an eNB to negotiate the handover trigger settings with a peer eNB controlling neighbouring cells.
The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

RadioLinkFailure Indication

The purpose of the Radio Link Failure Indication procedure is to transfer information regarding RRC re-establishment attempts, or received RLF Reports, between eNBs. The signalling takes place from the eNB at which a re-establishment attempt is made, or an RLF Report is received, to an eNB to which the UE concerned may have previously been attached prior to the connection failure. This may aid the detection of radio link failure and handover failure cases (TS 36.300 [15]).
The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

HandoverReport

The purpose of the Handover Report procedure is to transfer mobility related information between eNBs.
The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

CellActivation

The purpose of the Cell Activation procedure is to request to a neighbouring eNB to switch on one or more cells, previously reported as inactive due to energy saving reasons.
The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

X2Removal

The purpose of the X2 Removal procedure is to remove the signaling connection between two eNBs in a controlled manner. If successful, this procedure erases any existing application level configuration data in the two nodes.
The procedure uses non UE-associated signaling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

RetrieveUEContext

The purpose of the Retrieve UE Context procedure is to retrieve the UE context from the eNB where the RRC connection has been suspended (old eNB) and transfer it to the eNB where the RRC Connection has been requested to be resumed (new eNB) or to retrieve the UE context for a UE which attempts to re-establish its RRC connection in an eNB (the new eNB) different from the eNB (the old eNB) where the RRC connection failed, e.g. due to RLF.
The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

EN-DCX2Removal

The purpose of the EN-DC X2 Removal procedure is to remove the signaling connection between eNB and en-gNB in a controlled manner. If successful, this procedure erases any existing application level configuration data in the two nodes.

NOTE:   In case the signalling transport is shared among several X2-C interface instances, and the TNL association is still used by one or more X2-C interface instances, the initiating node should not initiate the removal of the TNL association.

The procedure uses non UE-associated signaling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

DataForwardingAddressIndication

The purpose of the Data Forwarding Address Indication procedure is to allow the new eNB to provide data forwarding addresses to the old eNB in case the RRC connection has been re-established, as specified in TS 36.300 [15].
The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

X2APMessageTransfer

The purpose of the X2AP Message Transfer procedure is to allow indirect transport of an X2AP message (except the X2AP MESSAGE TRANSFER message) between two eNBs and to allow an eNB to perform registration.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SeNB Addition Preparation

The purpose of the SeNB Addition Preparation procedure is to request the SeNB to allocate resources for dual connectivity operation for a specific UE.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SeNB Reconfiguration Completion

The purpose of the SeNB Reconfiguration Completion procedure is to provide information to the SeNB whether the requested configuration was successfully applied by the UE.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

MeNB initiated SeNB Modification Preparation

This procedure is used to enable an MeNB to request an SeNB to modify the UE context at the SeNB.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SeNB initiated SeNB Modification

This procedure is used by the SeNB to modify the UE context in the SeNB.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

MeNBInitiatedSeNBRelease

The MeNB initiated SeNB Release procedure is triggered by the MeNB to initiate the release of the resources for a specific UE.
The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SeNBInitiatedSeNBRelease

This procedure is triggered by the SeNB to initiate the release of the resources for a specific UE.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SeNBCounterCheck

This procedure is initiated by the SeNB to request the MeNB to execute a counter check procedure to verify the value of the PDCP COUNTs associated with SCG bearers established in the SeNB.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

EN-DCX2Setup

The purpose of the EN-DC X2 Setup procedure is to exchange application level configuration data needed for eNB and en-gNB to interoperate correctly over the X2 interface. This procedure erases any existing application level configuration data in the two nodes and replaces it by the one received. This procedure also resets the X2 interface like a Reset procedure would do.

NOTE:   If X2-C signalling transport is shared among multiple X2-C interface instances, one EN-DC X2 Setup procedure is issued per X2-C interface instance to be setup, i.e. several X2 Setup procedures may be issued via the same TNL association after that TNL association has become operational.

The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

EN-DCConfigurationUpdate

The purpose of the EN-DC Configuration Update procedure is to update application level configuration data needed for eNB and en-gNB to interoperate correctly over the X2 interface.

The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

EN-DCCellActivation

The purpose of the EN-DC Cell Activation procedure is to enable an eNB to request a neighbouring en-gNB to switch on one or more cells, previously reported as inactive due to energy saving reasons.

The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SgNBAdditionPreparation

The purpose of the SgNB Addition Preparation procedure is to request the en-gNB to allocate resources for EN-DC connectivity operation for a specific UE.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SgNBReconfigurationCompletion

The purpose of the SgNB Reconfiguration Completion procedure is to provide information to the en-gNB whether the requested configuration was successfully applied by the UE.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

MeNBInitiatedSgNBModificationPreparation

This procedure is used to enable an MeNB to request an en-gNB to modify the UE context at the en-gNB, or to query the current SCG configuration for supporting delta signalling in MeNB initiated SgNB change, or to provide the S-RLF-related information to the en-gNB.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SgNBInitiatedSgNBModification

This procedure is used by the en-gNB to modify the UE context in the en-gNB.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SgNBChange

This procedure is used by the en-gNB to change to another en-gNB.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

MeNBInitiatedSgNB Release

The MeNB initiated SgNB Release procedure is triggered by the MeNB to initiate the release of the resources for a specific UE.

The procedure uses UE-associated signalling'

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SgNBInitiatedSgNBRelease

This procedure is triggered by the en-gNB to initiate the release of the resources for a specific UE.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SgNBCounterCheck

This procedure is initiated by the en-gNB to request the MeNB to execute a counter check procedure to verify the value of the PDCP COUNTs associated with SN terminated bearers.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

RRCTransfer

The purpose of the RRC Transfer procedure is to deliver a PDCP-C PDU encapsulating an LTE RRC message to the en-gNB so that it may then be forwarded to the UE, or from the en-gNB, if it was received from the UE. Delivery status may also be provided from the en-gNB to the MeNB using the RRC Transfer.

The procedure is also to enable transfer of the NR RRC message container with the NR measurements from the MeNB to the en-gNB, when received from the UE.

The procedure is also to enable transfer of the NR RRC message container with the NR failure information from the MeNB to the en-gNB, when received from the UE.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SecondaryRATDataUsageReport

This procedure is initiated by the en-gNB to report secondary RAT data volume.

The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

PartialResetOfEN-DC

This procedure is triggered by the en-gNB or the MeNB to initiate the reset of the resources for selected UEs.

The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

E-UTRA–NRCel ResourceCoordination

The purpose of the E-UTRA – NR Cell Resource Coordination procedure is to enable coordination of radio resource allocation between an eNB and an en-gNB that are sharing spectrum and whose coverage areas are fully or partially overlapping. During the procedure, the eNB and en-gNB shall exchange their intended resource allocations for data traffic, and, if possible, converge to a shared resource. The procedure is only to be used for the purpose of E-UTRA – NR spectrum sharing.

The procedure uses non-UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

SgNBActivityNotification

The purpose of the SgNB Activity Notification procedure is to allow an en-gNB to send a notification to an eNB concerning user data traffic activity of already established E-RABs. The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

GNBStatusIndication

The purpose of the gNB Status Indication procedure is to inform the eNB that the en-gNB is overloaded so that overload reduction actions can be applied. The procedure uses non-UE associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

EN-DCConfigurationTransfer

The purpose of the EN-DC Configuration Transfer procedure is to transfer the EN-DC SON Configuration container, either from the eNB to the en-gNB or from the en-gNB to the eNB, in the context of en-gNB X2 TNL address discovery as described in TS 36.300 [15].

The procedure uses non UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

TraceStart

The purpose of the Trace Start procedure is to allow the MeNB to request the en-gNB to initiate a trace session for a UE. The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

DeactivateTrace

The purpose of the Deactivate Trace procedure is to allow the MeNB to request the en-gNB to stop the trace session for the indicated trace reference. The procedure uses UE-associated signalling.

OpenModelOperation

·         isOperationIdempotent:  false

·         isAtomic:  false

·         support: MANDATORY

cellCarrierId

String

1

the identity of a carrier in a cell for which policy is applicable

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

cellCarrierRelationId

String

1

the identifier of a cell relation (Neighbour Cell Relattion [36.300])

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

preference

PreferenceType

1

the preference of carrier usage [shall/prefer/avoid/forbid].

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

primary

PrimaryType

1

indicates if the carrier is used as primary connection [Yes, No, null]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

cellCarrierId

String

1

the identity of a carrier in a cell for which policy is applicable []

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

cellCarrierRelationId

String

1

the identifier of a cell relation (Neighbour Cell Relattion [36.300])

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

preference

PreferenceType

1

the preference of carrier usage [shall/prefer/avoid/forbid].

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

cellCarrierId

String

0..1

the identity of a carrier in a cell for which policy is applicable

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

effiencyMode

OptimizationType

1

the preference for efficiency [full capacity/energy efficient

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

id

DN

1

An attribute whose "name+value" can be used as an RDN when naming an instance of the object class. This RDN uniquely identifies the object instance within the scope of its containing (parent) object instance.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

vendorName

String

1

The name of the vendor.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

userDefinedState

String

1

An operator defined state for operator specific usage.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

swVersion

String

0..1

The software version of the ManagementNode or ManagedElement (this is used for determining which version of the vendor specific information is valid for the ManagementNode or ManagedElement).

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

priorityLabel

Integer

1

This is a label that consumer would assign a value on a concrete instance of the managed object. The management system takes the value of this attribute into account. The effect of this attribute value to the subject managed entity is not standardized

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

id

DN

1

An attribute whose "name+value" can be used as an RDN when naming an instance of the object class. This RDN uniquely identifies the object instance within the scope of its containing (parent) object instance.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

vnfParameterList

String

0..*

This attribute contains the parameter set of the VNF instance(s) corresponding to an NE. Each entry in the list contains:
-              vnfInstanceId
-              vnfdId (optional)
-              flavourId (optional)
-              autoScalable

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

peeParametersList

String

0..*

This attribute contains the parameter list for the control and monitoring of power, energy and environmental parameters of ManagedFunction instance(s).

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

priorityLabel

Integer

1

This is a label that consumer would assign a value on a concrete instance of the managed object. The management system takes the value of this attribute into account. The effect of this attribute value to the subject managed entity is not standardized

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

gNBId

String

1

It identifies a gNB within a PLMN. The gNB ID is part of the NR Cell Identifier (NCI) of the gNB cells.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

gNBIDLength

Integer

1

This indicates the number of bits for encoding the gNB ID

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

gNBCUName

String

1

It identifies the Central Entity of a NR node

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

pLMNIdList

PLMNId

1..*

List of unique identities for PLMN.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

id

DN

1

An attribute whose "name+value" can be used as an RDN when naming an instance of the object class. This RDN uniquely identifies the object instance within the scope of its containing (parent) object instance.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

vnfParameterList

String

0..*

This attribute contains the parameter set of the VNF instance(s) corresponding to an NE. Each entry in the list contains:
-              vnfInstanceId
-              vnfdId (optional)
-              flavourId (optional)
-              autoScalable

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

peeParametersList

String

0..*

This attribute contains the parameter list for the control and monitoring of power, energy and environmental parameters of ManagedFunction instance(s).

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

priorityLabel

Integer

1

This is a label that consumer would assign a value on a concrete instance of the managed object. The management system takes the value of this attribute into account. The effect of this attribute value to the subject managed entity is not standardized

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

pLMNIDList

PLMNId

1..*

List of unique identities for PLMN.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

gNBId

String

1

It identifies a gNB within a PLMN. The gNB ID is part of the NR Cell Identifier (NCI) of the gNB cells.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

gNBIdLength

Integer

1

This indicates the number of bits for encoding the gNB ID

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

id

DN

1

An attribute whose "name+value" can be used as an RDN when naming an instance of the object class. This RDN uniquely identifies the object instance within the scope of its containing (parent) object instance.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

vnfParameterList

String

0..*

This attribute contains the parameter set of the VNF instance(s) corresponding to an NE. Each entry in the list contains:
-              vnfInstanceId
-              vnfdId (optional)
-              flavourId (optional)
-              autoScalable

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

peeParametersList

String

0..*

This attribute contains the parameter list for the control and monitoring of power, energy and environmental parameters of ManagedFunction instance(s).

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

priorityLabel

Integer

1

This is a label that consumer would assign a value on a concrete instance of the managed object. The management system takes the value of this attribute into account. The effect of this attribute value to the subject managed entity is not standardized

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

gNBDUId

Integer

1

It uniquely identifies the DU at least within a gNB.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

gNBDUName

String

1

It identifies the Distributed Entity of a NR node

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

gNBId

String

1

It identifies a gNB within a PLMN. The gNB ID is part of the NR Cell Identifier (NCI) of the gNB cells.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

gNBIDLength

Integer

1

This indicates the number of bits for encoding the gNB ID

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

id

DN

1

An attribute whose "name+value" can be used as an RDN when naming an instance of the object class. This RDN uniquely identifies the object instance within the scope of its containing (parent) object instance.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

vnfParameterList

String

0..*

This attribute contains the parameter set of the VNF instance(s) corresponding to an NE. Each entry in the list contains:
-              vnfInstanceId
-              vnfdId (optional)
-              flavourId (optional)
-              autoScalable

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

peeParametersList

String

0..*

This attribute contains the parameter list for the control and monitoring of power, energy and environmental parameters of ManagedFunction instance(s).

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

priorityLabel

Integer

1

This is a label that consumer would assign a value on a concrete instance of the managed object. The management system takes the value of this attribute into account. The effect of this attribute value to the subject managed entity is not standardized

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

policyId

String

1

policy identifier assigned by the A1-P Producer when a policy is created

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

policyType

PolicyCapabilityType

1

policy type identifier

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

ueId

String

0..1

UE identifier

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

groupId

String

0..1

identifer of a pre-defined group of UEs, either NSSAI [23.501] or SPID [25.401]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

cellId

String

0..1

cell identifier [23.003]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

problemDetails

ProblemDetailsType

1

..*

In case a policy

request is not accepted, additional information can be provided.

Experimental

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

_policy

Policy

1

Policy that this error is associated with.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

policyId

String

1

policy identifier assigned by the A1-P Producer when a policy is created

Experimental

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

enforceStatus

EnforcementStatusType

1

Experimental

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

_policy

Policy

1.

.*

List of policies specified by the PolicyList

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

enforceStatus

EnforcementStatusType

1

indicating if policy is being enforced or not

Experimental

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:

  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

enforceReason

EnforcementReasonType

0..1

Indicating the reason why a policy is no longer being enforced

Experimental

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

_policy

Policy

1

The policy that this notification is for.

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

resourceType

Boolean

0..1

Resource Type, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

priorityLevel

Number

0..1

Priority Level, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

pdb

Number

0..1

Packet Delay Budget, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

per

Number

0..1

Packet Error Rate, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

averageWindow

Number

0..

1

Averaging Window, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

mdbv

Number

0.

.1

Maximum Data Burst Volume, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

5qi

Number

1

5G QoS Identifier, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

arp

Arp

0..*

Allocation and Retention Priority, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

resourceType

Boolean

1

Resource Type, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

priorityLevel

Number

1

Priority Level, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

pdb

Number

1

Packet Delay Budget, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

per

Number

1

Packet Error Rate, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

averageWindow

Number

1

Averaging Window, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0

·         uniqueSet:

·         isInvariant:  false

·         unsigned:  false

·         counter: NA

·         support: MANDATORY

mdbv

Number

1

Maximum Data Burst Volume, see [23.501]

OpenModelAttribute

·         partOfObjectKey:  0