This wiki describes how to deploy the NONRTRIC components within Kubernetes cluster.

NONRTRIC Architecture

NONRTRIC comprises several components,

1. Control Panel
2. Policy Management Service
3. Information Coordinator Service
4. Non RT RIC Gateway (reuse of existing kong proxy is also possible)
5. R-App catalogue Service
6. Enhanced R-App catalogue Service
7. A1 Simulator (3 A1 interface versions - previously called Near-RT RIC A1 Interface)
8. A1 Controller (currently using SDNC from ONAP)
9. Helm Manager
10. Dmaap Adapter Service
11. Dmaap Mediator Service
12. Use Case rApp O-DU Slice Assurance
13. Use Case rAPP O-RU Closed loop recovery
14. CAPIF core
15. RANPM
16. RAPP Manager
17. DME Participant

In the IT/Dep repo, there are helm charts for each these components. In addition, there is a chart called nonrtric, which is a composition of the components above.

Prerequisites

• kubernetes v1.19 +

• docker and docker-compose (latest)

• git
• Text editor, e.g. vi, notepad, nano, etc.
• helm
• helm3

• ChartMuseum to store the HELM charts on the server, multiple options are available:

  • Execute the install script:

    ./dep/smo-install/scripts/layer-0/0-setup-charts-museum.sh

  • Install chartmuseum manually on port 18080 (https://chartmuseum.com/#Instructions, https://github.com/helm/chartmuseum)

Introduction to Helm Charts

In NONRTRIC we use Helm chart as a packaging manager for kubernetes. Helm charts helps developer to package, configure & deploy the application and services into kubernetes environments.

Before proceeding you will need to be familar with helm, kubernetes and  basic bash. For an introduction to helm see: https://helm.sh/docs/intro/quickstart/

Preparations

Download the the it/dep repository.

git clone "https://gerrit.o-ran-sc.org/r/it/dep"

However, for some use cases below you will also need to clone some additional linked repositories (git submodules). 
To download these, replace the command above to include the '–recursive' parameter/switch:

#Submodule 'ranpm' (https://gerrit.o-ran-sc.org/r/nonrtric/plt/ranpm) registered for path 'ranpm'
#Submodule 'ric-dep' (https://gerrit.o-ran-sc.org/r/ric-plt/ric-dep) registered for path 'ric-dep'
#Submodule 'smo-install/multicloud-k8s' (https://github.com/onap/multicloud-k8s.git) registered for path 'smo-install/multicloud-k8s'
#Submodule 'smo-install/onap_oom' (https://gerrit.onap.org/r/oom) registered for path 'smo-install/onap_oom'
git clone --recursive "https://gerrit.o-ran-sc.org/r/it/dep"

Note: This places all artifacts in a directory 'dep', which is the base directory for all operations that follow.
Note: Git Branches are currently not used in the it/dep repository. The latest version (master branch) is used here, but if changes are made then the instruction below may become outdated. The instructions below are accurate at time of writing, during the J-Release time-frame.  Earlier versions of the it/dep repo may be used by examining the Git log for the repo.

Configuration of components to install

It is possible to configure which of nonrtric components to install, including the platform functions, simulators and graphical control panels. This configuration is made in the override for the helm package.
Edit the file dep/RECIPE_EXAMPLE/NONRTRIC/example_recipe.yaml 

<editor> dep/RECIPE_EXAMPLE/NONRTRIC/example_recipe.yaml 

The file shown below is a snippet from the override example_recipe.yaml.

All parameters beginning with 'install' can be configured 'true' for enabling installation and 'false' for disabling installation.

For the parameters installNonrtricgateway and installKong, only one can be enabled.

There are many other parameters in the file that may require adaptation to fit a certain environment. For example hostname, namespace and port to message router etc. These integration details are not covered in this guide.  

# Here you can enable inclusion or exclusion of each component. A not enabled component will not be installed.
nonrtric:
  installPms: true
  installA1controller: true
  installA1simulator: true
  installControlpanel: true
  installInformationservice: true
  installRappcatalogueservice: true
  installRappcatalogueenhancedservice: true
  # Enable either installNonrtricgateway or installKong. Both cannot be enabled at the same time
  installNonrtricgateway: false
  installKong: true 
  installDmaapadapterservice: true
  installDmaapmediatorservice: true
  installHelmmanager: true
  installOrufhrecovery: true
  installRansliceassurance: true
  installCapifcore: true
  installServicemanager: true
  # When enabling Ranpm, set value false above for installControlpanel, installInformationservice, installNonrtricgateway
  installRanpm: false
  # rApp Manager functionality relies on ONAP ACM for its operation
  installrAppmanager: true
  # DME Participant should only be activated when ONAP ACM installation is available for this participant to utilize
  installDmeParticipant: false

  volume1:
    # Set the size to 0 if you do not need the volume (if you are using Dynamic Volume Provisioning)
    size: 2Gi
    storageClassName: pms-storage
    hostPath: /var/nonrtric/pms-storage
  volume2:
     # Set the size to 0 if you do not need the volume (if you are using Dynamic Volume Provisioning)
    size: 2Gi
    storageClassName: ics-storage
    hostPath: /var/nonrtric/ics-storage
  volume3:
    size: 1Gi
    storageClassName: helmmanager-storage

...
...
...

Installation

There is a script that packs and installs the components by using the helm command.  The installation uses a values override file like the one shown above. This example can be run like this:

sudo ./bin/deploy-nonrtric.sh -f dep/nonrtric/RECIPE_EXAMPLE/example_recipe.yaml

Uninstalling

There is a script that uninstalls installs the NONRTRIC components. It is simply run like this:

sudo ./dep/bin/undeploy-nonrtric.sh

Troubleshooting A1-Policy functions

• After successful installation, control panel shows "No Type" as policy type as shown below.
  

• If there is no policy type shown and UI looks like below, then the setup can be investigated with below steps (It could be due to synchronization delay as well, It gets fixed automatically after few minutes)
   

• Verify the A1 PMS logs to make sure that the connection between A1 PMS and a1controller is successful. 

  • Command to check pms logs

    Kubernetes command to get PMS logs

    kubectl logs policymanagementservice-0 -n nonrtric

  • Command to enable debug logs in PMS (Command below should be executed inside k8s pods or the host address needs to be updated with the relevant port forwarding)

    Enabling debug logs in PMS

    curl --request POST \
    --url http://policymanagementservice:9080/actuator/loggers/org.onap.ccsdk.oran.a1policymanagementservice \
    --header 'Content-Type: application/json' \
    --data '{ "configuredLevel": "DEBUG" }'

• Try removing the controller information in specific simulator configuration and verify the simulator are working without a1controller.

  application_configuration.json Expand source

  ...
   {
      "name":"ric1",
      "baseUrl":"https://a1-sim-osc-0.a1-sim:8185",
      "managedElementIds":[
         "kista_1",
         "kista_2"
        ]
   },
  ...

• For troubleshooting the curl command is available in the can be used in controlpanel pod.