Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 26 Next »


This page describes how to demonstrate the entire flow from Non-Rt RIC Controlpanel -> A1 controller in SDNC -> Near Realtime Ric Simulator 

Overview of the End to End call

Details of the architecture can be found from the following link: Release A 


Procedure to establish the End to End call

Preparation


Perform Policy Operations via Dashboard

  • Click on Config and the screen below with STD_QosNudging_0.2.0 policy type should open



  • Click on '+' icon to create new policy

  • Choose your ric (ric1 or ric2) from drop-down menu and provide any arbitrary values for QoS Id, Ue Id and Priority

  • Submit the policy (you then need to also press Close to return from creation view)
  • An entry to the chosen nearRT-RIC simulator console/log should appear (see, for example, docker logs ric1 in case ric1 policy was created):
172.18.0.3 - - [02/Apr/2020 07:33:57] "PUT /A1-P/v1/policies/ac3e914a-b39c-4d93-b77c-d2ebac756267?policyTypeId=STD_QoSNudging_0.2.0 HTTP/1.1" 201 - 
  • You may repeat the creation process a few times for different rics - below we see one policy created to ric1 and two to ric2

  • Click the pen icon to modify any policy

  • Even though the dashboard allows changing any value, the simulator will only accept Priority changes
  • Modifications are submitted in the same way as in creation, and the resulting simulator log should also be identical to the one we saw in creation
172.18.0.3 - - [02/Apr/2020 07:51:19] "PUT /A1-P/v1/policies/ac3e914a-b39c-4d93-b77c-d2ebac756267?policyTypeId=STD_QoSNudging_0.2.0 HTTP/1.1" 201 - 

  • Delete any policy by clicking the red trashcan icon

  • Confirm deletion and verify the log on simulator side:
172.18.0.3 - - [02/Apr/2020 08:02:21] "DELETE /A1-P/v1/policies/ac3e914a-b39c-4d93-b77c-d2ebac756267 HTTP/1.1" 204 - 


  • No labels