Detail the approach of steps for xFAPI, OSC-DU & FlexRAN deployment
Detail the approach of steps for xFAPI, OSC-DU & FlexRAN deployment
1.1) Description:
xFAPI is an intermediate component that bridges the L1 and L2 layers within the O-RAN architecture. It functions as a translator for both FAPI and nFAPI interfaces, ensuring seamless communication between these interfaces.
It comprises of two major components:
API Translator translates the vendor-specific APIs used by L1 and L2 vendors whereas IPC Integrator provides interoperability between L1 and L2 components by overcoming IPC compatibility challenges.
In addition to its core functions, xFAPI provides advanced features such as detailed PDU statistics generation at both interfaces, robust debugging tools like a memory logger, state manager, multi-level logging, and a comprehensive dashboard for monitoring and analysis.
xSM: The "x" in xSM signifies "any," while "SM" stands for "Shared Memory." xSM is an advanced shared memory library designed to standardize IPC through shared memory. It simplifies communication between L1 and L2 components, which often rely on different shared memory libraries.
1.2) System topology
Detail the hardware and software requirements necessary for the installation
Cores: 3rd gen N series Intel Cpu
Accelerator : ACC100
RAM : 128 GB memory
Storage: 500 GB
Operating System: Ubuntu 22.04 with Real-time kernel
Recommended:
Cores: 4th Gen N series Intel Cpu with Vran boost
RAM: 256Gi Memory
Step-by-step instructions for deployment
3.1) Environment Setup
Step up the env. variables for FlexRAN :
cd phy/ source setupenv.sh |
Load Env. variables for xFAPI :
cd <xfapi directory> source loadenvvar.sh |
Configure IPs for OSC-DU High and cu_stub :
ifconfig lo:ODU "192.168.130.81" ifconfig lo:CU_STUB "192.168.130.82" |
3.2) Prerequisites
Before proceeding, ensure the following dependencies are installed on your system:
GCC
Make sure you have GCC version 9.5 installed :
sudo apt-get install -y build-essential gcc --version |
LKSCTP
Install the LKSCTP library:
sudo apt-get install -y libsctp-dev |
PCAP:
sudo apt-get install -y libpcap-dev |
ICX :
icx (ICX) 2023.0.0 (2023.0.0.20221201)
Intel oneAPI :
Intel oneAPI version: l_BaseKit_p_2023.0.0.25537_offline.sh, (2023.0.0)
DPDK :
DPDK Configuration: Intel DPDK version 22.11.1
Cmake :
Recommended version of Cmake: cmake version 3.9.2
3.3) FlexRAN
Clone the project repo:
git clone https://github.com/intel/FlexRAN |
Add the env setting script to .bashrc :
vim ~/.bashrc add source /opt/intel/oneapi/setvars.sh to the script |
3.4) xSM Library
Locate the Zip Folder:
mv /path/to/xSM_lib.zip /desired/deployment/path/ |
Unzip the project :
cd /desired/deployment/path/ unzip xSM_lib.zip |
3.5) OSC Du-High
First, create a directory where you will clone the O-DU High code. This folder will be referred to as <O-DU High Directory>.
mkdir <O-DU High Directory> cd <O-DU High Directory> |
Clone the project repo:
git clone https://github.com/o-ran-sc/o-du-l2.git cd o-du-l2 git checkout i-release |
Modify the Makefile :
Go to the /build/odu directory and make the following changes in the Makefile:
Copy the wls_lib folder from the O-DU PHY repository:
git clone https://github.com/o-ran-sc/o-du-phy.git |
After cloning, copy the wls_lib folder into the O-DU L2 source directory (/o-du-l2/src/):
cp -r o-du-phy/wls_lib/ <O-DU High Directory>/o-du-l2/src/ |
Compilation
Build O-DU High in the o-du-l2/build/odu Directory:
make clean_odu PHY=INTEL_L1 MACHINE=BIT64 MODE=TDD make odu PHY=INTEL_L1 MACHINE=BIT64 MODE=TDD |
Build cu_stub :
make clean_cu NODE=TEST_STUB MACHINE=BIT64 MODE=TDD make cu_stub NODE=TEST_STUB MACHINE=BIT64 MODE=TDD |
Copy the libxsm.so from /src/xSM_lib :
cp ../../src/xSM_lib/libxsm.so ../../bin/odu |
Navigate to the Binary Directory:
cd ../../bin |
3.6) xFAPI
Locate the Zip Folder:
mv /path/to/xfapi.zip /desired/deployment/path/ |
Unzip the project :
cd /desired/deployment/path/ unzip xfapi.zip |
3.7) By this point, we should have the required binaries at these places
Flexran binary [l1app] at:
FlexRAN/l1/bin/nr5g/gnb/l1 |
xFAPI binary [xfapi_app] at :
<xFAPI_directory>/bin/xfapi_app |
xSM_lib .so file [libxsm.so] at :
<xFAPI_directory>/bin/libxsm.so <OSC_DU_high_directory>/bin/odu/libxsm.so |
ODU binary [odu] at :
<OSC_DU_high_directory>/bin/odu/cu_stub |
cu_stub binary [cu_stub] at :
<OSC_DU_high_directory>/bin/odu/odu |
3.8) Executing Stack
The sequence of execution of binaries is:
FlexRAN
xFAPI
cu_stub
OSC DU-High
Executing FlexRAN :
cd FlexRAN/l1/bin/nr5g/gnb/l1 ./l1.sh -xran [for radio] ./l1.sh -e [for timer mode] |
Executing xFAPI :
cd <xFAPI_directory>/bin ./run_xfapi.sh |
Executing cu_stub :
cd <OSC_DU_high_directory>/bin/odu/odu ./cu_stub |
Executing DU-High :
cd <OSC_DU_high_directory>/bin/odu/odu ./odu |
Outline how to verify that the installation was successful.
4.1) step 1
Expected Result:
Provide common issues and their solutions.
Issue 1: Error in loading shared libraries while executing the FlexRAN
./l1.shxran Radio mode with XRAN Sub6 100Mhz ./l1.sh: line 33: ./dpdk.sh: No such file or directory kernel.sched_rt_runtime_us = -1 kernel.shmmax = 2147483648 kernel.shmall = 2147483648 using configuration file phycfg_xran.xml using configuration file xrancfg_sub6.xml |
Solution:
cd phy/ source setupenv.sh |
Issue 2: Parsing error in FlexRAN
FlexRAN SDK bblib_lte_rate_dematching_5gnr version #DIRTY# Cannot open file FlexRAN SDK bblib_lte_turbo version #DIRTY# FlexRAN SDK bblib_lte_rate_matching version #DIRTY# FlexRAN SDK bblib_srs_fft_cestimate_5gnr version #DIRTY# FlexRAN SDK bblib_mldts_process_5gnr version #DIRTY# Exitting the application because of xml parsing issues Cleanup after [PID] 1233284 |
Solution:
Update the <version> in phycfg_xran.cfg file, located at : FlexRAN/l1/bin/nr5g/gnb/l1/phycfg_xran.xml # Original File <PhyConfig> <version>oran_k_release_v1.0</version> <Api> <!-- Maximum number of successive missing API allowed before triggering PHY stop (-1 <successiveNoApi>15</successiveNoApi> <!-- WLS Wakeup Secondary process mode. 1: Wakeup using Semaphore. 0: Do usleep and <wls_sema_wake_up>1</wls_sema_wake_up> # Changes in file <PhyConfig> <version>23.07</version> <Api> <!-- Maximum number of successive missing API allowed before triggering PHY stop (-1 <successiveNoApi>30</successiveNoAρί> <!-- WLS Wakeup Secondary process mode. 1: Wakeup using Semaphore. 0: Do usleep and <wls_sema_wake_up>1</wls_sema_wake_up> |
Issue 3: Error in loading xsm lib in xFAPI
./run_xfapi.sh STARTING XFAPI: ./xfapi_app: error while loading shared libraries: libxsm.so: cannot open shared object file: No such file or directory |
Solution:
cd <xfapi directory> source loadenvvar.sh |
Issue 4: Failed to bind the socket while executing the cu_stub
EGTP: Failed to bind socket EGTP: Transport server open request failed DEBUG --> SCTP: Initializing date: 10/08/2024 time: 07:55:32 mtss(posix): sw error: ent: 255 inst: 255 proc id: 000 file: /home/four/du_with_cuStub/src/cm/cm_inet.c line: 1743 errcode: 00007 errcls: ERRCLS_DEBUG errval: 00000 errdesc: cmInetSctpBindx() Failed: error (99), port (38472), sockFd->fd(5) |
Solution:
Configure the virtual IP addresses ifconfig lo:ODU "192.168.130.81" ifconfig lo:CU_STUB "192.168.130.82" |
NOTE: Log files can be generated in xFAPI for detailed analysis. Both horizontal and vertical logging levels can be configured in the xfapi_cfg.cfg file.
Log file configuraitons [log_file] Generate_Logs_File=true #verical level logs generation in log file Vertical_Level_File=LOG_DEBUG #xfapi log generation in log file Xfapi_Log_File=true #XSM log generation in log file xSM_Log_File=true #P5 log generation in log file P5_Log_File=true #P7 log generation in log file P7_Log_File=true #Date and time log generation in log file Print_Datetime_File= true |
List of additional documentation, links, or resources that may be helpful.
Documentation: (Link to official documentation or user manuals.)
Support: (Contact information for support or a link to a support forum.)