This page describes how to demonstrate the entire flow from Non-Rt RIC Controlpanel -> (A1 controller in SDNC) -> Near Realtime Ric Simulator. Optionally A1 controller can be left out.

Overview of the End to End call

Details of the architecture can be found from the following link: Release A 

End to End call from Dashboard to NearRT-RIC simulator

Preparation

See Release A - Build/Run for building and starting the environment.

Either option A or B can be setup and all end to end actions from Dashboard should work same way.

Perform Policy Operations via Dashboard

• Open Dashboard UI at http://localhost:8080/

• Click on Config and the screen below with STD_QosNudging_0.2.0 policy type should open

• Click on '+' icon to create new policy

• Choose your ric (ric1 or ric2) from drop-down menu and provide any arbitrary values for QoS Id, Ue Id and Priority

• Submit the policy (you then need to also press Close to return from creation view)
• An entry to the chosen nearRT-RIC simulator console/log should appear (see, for example, docker logs ric1 in case ric1 policy was created):

172.18.0.3 - - [02/Apr/2020 07:33:57] "PUT /A1-P/v1/policies/ac3e914a-b39c-4d93-b77c-d2ebac756267?policyTypeId=STD_QoSNudging_0.2.0 HTTP/1.1" 201 - 

• You may repeat the creation process a few times for different rics - below we see one policy created to ric1 and two to ric2

• Click the pen icon to modify any policy

• Even though the dashboard allows changing any value, the simulator will only accept Priority changes
• Modifications are submitted in the same way as in creation, and the resulting simulator log should also be identical to the one we saw in creation

172.18.0.3 - - [02/Apr/2020 07:51:19] "PUT /A1-P/v1/policies/ac3e914a-b39c-4d93-b77c-d2ebac756267?policyTypeId=STD_QoSNudging_0.2.0 HTTP/1.1" 201 - 

• Delete any policy by clicking the red trashcan icon

• Confirm deletion and verify the log on simulator side:

172.18.0.3 - - [02/Apr/2020 08:02:21] "DELETE /A1-P/v1/policies/ac3e914a-b39c-4d93-b77c-d2ebac756267 HTTP/1.1" 204 - 

Call from CCSDK A1 Controller to NearRT-RIC simulator

Limited tests to verify just OSC CCSDK A1 Controller calls towards NearRT-RIC simulator can be done by using ODL GUI. Dashboard and policy-agent are not needed in this case.

Preparation

See Release A - Build/Run for building and starting the environment. If following those instructions, just skip steps:

• Release A - Build/Run#RunPolicy-agentDockerContainer

• Release A - Build/Run#RunNon-RT-RICDashboardDockerContainer

Now only "a1-controller-container" and "sdnc_db_container" and simulators are running.

Perform Policy Operations via Open Daylight GUI

• Open GUI: Release A - Build/Run#OpenDaylightGUI
• Click Sub API: 

  A1-ADAPTER-API(2020-01-22)

Get policy types

Payload

{
  "A1-ADAPTER-API:input": {
    "near-rt-ric-url": "http://ric1:8085/"
  }
}

Create policy

Payload

{
  "A1-ADAPTER-API:input": {
    "near-rt-ric-url": "http://ric1:8085/",
	"policy-id": "my-policy-instance1",
    "policy-type-id": "STD_QoSNudging_0.2.0",
	"policy": '{
      "scope": {
      "qosId": "999",
      "ueId": "5001"
      },
      "statement": {
      "priorityLevel": 5
      }
    }'
  }
}

Get policy instances

Payload

{
  "A1-ADAPTER-API:input": {
    "near-rt-ric-url": "http://ric1:8085/"
  }
}