Standalone NONRTRIC Installation

Owned by Aravindhan Ayyanathan
Last updated: Nov 13, 2024
1 min read

1. Introduction

This page provides the installation guidelines for all the NONRTRIC components as part of the standalone NONRTRIC charts(nonrtric) in it/dep(https://gerrit.o-ran-sc.org/r/admin/repos/it/dep,general) repository.

2. Minimum Requirements

  • Cores : 8

  • RAM : 20G

  • Storage : 50G

  • Operating System : Ubuntu (20.04/22.04)

3. Installation

Step by step installation instructions for this installation is available as part of Release J - Run in Kubernetes page.

Steps provided below provides an overview of the expected steps.

a) Step 1: Install base components.

Expected Result: Base components(Kubernetes, Chartmuseum, Helm 3, jq…) should be installed and available to use.

b) Step 2: Install the charts.

Expected Result: All the helm chart files are built and uploaded into Chartmuseum server and installed.

4. Post-Installation Verification

All the expected pods should be up and running. It can be verified using the command below.

kubectl get po -n nonrtric

5. Troubleshooting

Troubleshooting steps are provided as part of the installation instructions page Release J - Run in Kubernetes .

6. Additional Resources